Monday, January 19, 2009

Craftsman 1350 B&S 27" Snowblower


http://www.sears.ca/gp/product/B001J13KC4/178-0874935-2786800?ie=UTF8&searsBrand=core

Last January (2008) I decided to take the plunge and pick up a snowblower. We had a crazy year for snow in this part of the world and it was getting to the point that I couldn't get the snow out of my driveway because of the size of the snowbanks. 

My selection was limited at the time because everyone else in the world also decided at the same time to do the same. After much searching I found a Craftsman model (Craftsman 1350 B&S 27") that was only backordered 3 weeks. (that was good at the time!) Anyway, I jumped at it. 

It has been almost a year now that I've had it so I thought I would write a review. 

Things didn't start off well with this machine. The 3rd time I used it I had a major failure. A pully that drives the augar snapped in two. Of course, since this was a very common problem in that model (according to the repair guy) I had to wait two weeks (and two major storms) for a replacement.  

Since then it has worked relatively well. 

The good
  • Throws snow like a demon. Easily throws snow 30'. (be careful of cars and windows!)
  • Starts effortlessly with the electric start
  • Doesn't mind the odd stone (I have a crushed rock driveway and thus blew as much stone as snow until it froze)
The bad
  • The controls freeze quite easily and require manual intervention to free
  • Eats gas (I'm not sure if this is common in snow blowers)
  • The drift cutters won't stay adjusted and keep falling
  • The reverse gear is almost useless
Summary
I don't have a lot of exposure to these as this is my first one snow thrower. I'm guessing that there are better models out there than this one and I would try a different one next time. That being said, it has saved me a LOT of shoveling again this year and I'm happy every time that can leave the shovel in the garage. 

Friday, January 16, 2009

ROAR2


I thought that I should put a mention in here about a previous article that I wrote for Duckworks Magazine. The article documents my build of my ROAR2 rowboat, designed by  Jim Michalak 

I got a lot of positive feedback from the article. I'm currently doing some maintenance to the ROAR2 because of an ice incident last winter. I'll post on that once I take some pics but I'm basically rebuilding the gunnels, fixing some rot areas and installing permanent seats/storage areas.


New Immaculate Machine albumn coming!


I just noticed that one of my favorite bands, Immaculate Machine, is releasing a new albumn this spring.

If you haven't checked these folks out you really need to. I've seen them 3 times in concert (Victoria, Saint John and Fredericton) and they put on a great show. Definitely one of Canada's music gems that haven't gotten the attention they deserve. All three of them are fantastic musicians.

You can check out some of their tunes on CBC Radio 3 but you should really buy one of their albumns!